View B41821K4228M003_1215971.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Aluminum electrolytic capacitors
Single-ended capacitors
Series/Type: Date:
B41821, B43821 December 2006
(c) EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Single-ended capacitors Standard series 85 C
B41821, B43821
General-purpose grade capacitors Applications General-purpose applications in the entertainment industry Semi-professional to professional application range For filtering, coupling and pulse circuits Features Compact dimensions High CV product, i.e. very compact Good electrical characteristics Construction Radial leads Charge-discharge proof, polar Aluminum case with insulating sleeve Minus pole marking on the insulating sleeve Case with safety vent from diameter 6.3 mm Delivery mode Terminal configurations and packing: Bulk Taped, Ammo pack Cut Kinked PAPR (protection against polarity reversal): crimped leads, J leads, bent leads Refer to chapter "Single-ended capacitors Taping, packing and lead configurations" for further details and ordering example.
Please read Cautions and warnings and Important notes at the end of this document.
Page 2 of 36
B41821, B43821 Standard series 85 C
Specifications and characteristics in brief Series Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance tolerance Dissipation factor tan (20 C, 120 Hz) B41821 6.3 ... 100 V DC 1.15 VR 0.1 ... 10000 F 20% M B43821 160 ... 450 V DC 1.1 VR 0.47 ... 560 F 20% M
For capacitance higher than 1000 F add 0.02 for every increase of 1000 F. VR (V DC) tan (max.) 6.3 10 16 25 35 50 63 100 160 ... 450
0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10 0.20
Leakage current Ileak (20 C, 5 min) Self-inductance ESL or 3 A, whichever is greater Diameter (mm) 6.3 8 ... 12.5 ESL (nH) Useful life 85 C, VR, IAC,R 40 C, VR, 1.3 IAC,R 40 C, VR, 1.6 IAC,R Requirements > 2000 h > 100000 h C/C tan Ileak 2000 h C/C tan Ileak 15 20 16 26 > 3000 h > 100000 h 45% of initial value 3 times initial specified limit initial specified limit 2000 h 30% of initial value 2 times initial specified limit initial specified limit 18 34 20 ... 25 40
Voltage endurance test 85 C, VR Post test requirements
Vibration resistance test
To IEC 60068-2-6, test Fc: Displacement amplitude 0.75 mm, frequency range 10 ... 2000 Hz, acceleration max. 20 g, duration 3 x 2 h. Capacitor rigidly clamped by the aluminum case. To IEC 60068-1: VR 250 V: 40/085/56 ( 40 C/+85 C/56 days damp heat test) VR 350 V: 25/085/56 ( 25 C/+85 C/56 days damp heat test) IEC 60384-4
IEC climatic category
Sectional specification
Please read Cautions and warnings and Important notes at the end of this document.
Page 3 of 36
B41821, B43821 Standard series 85 C
Dimensional drawings With stand-off rubber seal Diameters (mm): 6.3, 8, 10, 12.5, 16, 18, 22, 25 With flat rubber seal Diameters (mm): 5, 8, 20
Safety vent for diameter 6.3 mm. Dimensions and weights Dimensions (mm) d +0.5 5 6.3 8 10 10 10 12.5 12.5 16 16 16 18 18 18 20 20 20 22 22 25 Approx. weight g 0.5 0.7 1.0 1.6 1.9 2.6 3.6 4.5 5.5 7.5 7.8 11.0 13.0 16.0 14.0 18.0 20.0 21.0 23.0 25.0
l 11 +1.0 11 +1.0 11.5 +1.5 12.5 +1.0 16 +1.0 20 +2.0 20 +2.0 25 +2.0 20 +2.0 25 +2.0 31.5 +2.0 31.5 +2.0 35 +2.0 40 +2.0 30 +2.0 35 +2.0 40 +2.0 35 +2.0 40 +2.0 40 +2.0
a 0.5 2.0 2.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 12.5
b 0.50 0.05 0.50 0.05 0.60 0.05 0.60 0.05 0.60 0.05 0.60 0.05 0.60 0.05 0.60 0.05 0.80 0.05 0.80 0.05 0.80 0.05 0.80 0.1 0.80 0.1 0.80 0.1 1.0 0.1 1.0 0.1 1.0 0.1 1.0 0.1 1.0 0.1 1.0 0.1
Please read Cautions and warnings and Important notes at the end of this document.
Page 4 of 36
B41821 Standard series 85 C
Overview of available types
B41821
Other voltage and capacitance ratings are available upon request. VR (V DC) CR (F) 33 47 68 100 150 220 270 330 470 560 680 1000 1500 2200 3300 4700 6800 8200 10000 6.3 x 11 6.3 x 11 6.3 x 11 8 8 10 10 10 10 10 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 20 x 20 5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 8 8 10 10 10 10 x 11.5 x 11.5 x 11.5 x 12.5 x 12.5 x 20 x 20 5 5 x 11 x 11 6.3 x 11 6.3 x 11 8 8 8 10 10 10 10 10 x 11.5 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 16 x 20 5 x 11 5 5 x 11 x 11 6.3 10 16 25 35 Case dimensions d x l (mm)
6.3 x 11 6.3 x 11 8 8 10 10 10 10 10 16 16 16 18 18 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 20 x 20 x 20 x 25 x 31.5 x 35 x 40
6.3 x 11 6.3 x 11 8 8 8 10 10 10 10 x 11.5 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 20
12.5 x 20
12.5 x 20 12.5 x 25 16 16 18 18 20 x 25 x 31.5 x 35 x 40 x 40
12.5 x 20 12.5 x 25 16 x 25 16 16 18 18 18 x 25 x 31.5 x 31.5 x 31.5 x 35
12.5 x 25 16 16 16 18 x 20 x 25 x 31.5 x 31.5
12.5 x 25
Please read Cautions and warnings and Important notes at the end of this document.
Page 5 of 36
B41821 Standard series 85 C
VR (V DC) CR (F) 0.10 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 22 33 47 68 100 150 220 270 330 470 560 680 1000 1500 2200 3300 4700
50
63
100
Case dimensions d x l (mm) 5 5 5 5 5 5 5 5 5 5 5 5 5 x 11 x 11 5 x 11 x 11 6.3 x 11 8 10 10 10 10 x 11.5 x 12.5 x 12.5 x 16 x 20 x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 11 x 11
5 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 x 11.5 8 8 10 10 10 10 x 11.5 x 11.5 x 12.5 x 16 x 20 x 20
6.3 x 11 6.3 x 11 6.3 x 11 8 8 10 10 10 10 x 11.5 x 11.5 x 12.5 x 16 x 16 x 20
12.5 x 25 12.5 x 25 16 16 16 16 18 20 x 25 x 25 x 31.5 x 31.5 x 40 x 40
12.5 x 20 12.5 x 25 12.5 x 25 16 16 16 18 18 18 20 25 x 20 x 25 x 31.5 x 31.5 x 35 x 40 x 40 x 40
12.5 x 20 12.5 x 20 12.5 x 25 16 16 18 18 20 x 25 x 31.5 x 35 x 35 x 40
Please read Cautions and warnings and Important notes at the end of this document.
Page 6 of 36
B43821 Standard series 85 C
Overview of available types
B43821
Other voltage and capacitance ratings are available upon request. VR (V DC) CR (F) 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 22 33 47 68 100 150 220 270 330 470 560 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 8 10 10 10 10 x 11.5 x 11.5 x 12.5 x 16 x 16 x 20 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 10 10 10 10 10 x 11.5 x 12.5 x 12.5 x 16 x 20 x 20 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 6.3 x 11 8 8 10 10 10 10 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 20 6.3 x 11 6.3 x 11 6.3 x 11 8 8 10 10 10 10 x 11.5 x 11.5 x 12.5 x 12.5 x 16 x 20 10 10 10 10 10 x 12.5 x 12.5 x 16 x 16 x 20 10 10 10 10 10 x 12.5 x 16 x 16 x 20 x 20 160 200 250 350 400 450 Case dimensions d x l (mm)
12.5 x 25 12.5 x 25 16 18 18 20 20 x 25 x 31.5 x 35 x 30 x 40
12.5 x 25 16 16 18 18 20 20 x 20 x 25 x 31.5 x 40 x 35 x 40
12.5 x 25 16 x 25 16 16 16 18 18 20 x 25 x 31.5 x 31.5 x 31.5 x 35 x 40
12.5 x 20 12.5 x 25 16 x 20 16 16 18 18 22 22 x 25 x 31.5 x 40 x 40 x 35 x 40
12.5 x 20 12.5 x 25 12.5 x 25 16 x 20 12.5 x 25 16 x 25 16 16 18 18 18 18 20 22 22 x 31.5 x 31.5 x 31.5 x 35 x 40 x 35 x 30 x 35 x 40
12.5 x 20 12.5 x 25 12.5 x 25 16 x 20 16 18 18 20 22 x 25 x 31.5 x 35 x 35 x 35
Please read Cautions and warnings and Important notes at the end of this document.
Page 7 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 2.1 1.7 1.4 1.0 0.83 0.68 0.46 0.31 0.23 0.16 0.12 4.0 2.7 1.8 1.5 1.2 0.85 0.71 0.59 0.40 0.27 0.20 0.14 0.11 0.08 0.08 0.07
B41821 ESRmax 10 kHz 20 C 1.6 1.3 1.1 0.77 0.64 0.52 0.35 0.24 0.18 0.12 0.09 3.1 2.1 1.4 1.2 0.92 0.65 0.55 0.45 0.31 0.21 0.15 0.11 0.08 0.06 0.06 0.05 Zmax 100 kHz 20 C 1.5 1.2 1.0 0.71 0.59 0.49 0.33 0.22 0.16 0.11 0.09 2.90 1.90 1.30 1.10 0.86 0.61 0.51 0.42 0.29 0.19 0.14 0.10 0.08 0.06 0.06 0.05 IAC,R 120 Hz 85 C mA 230 250 280 380 410 520 650 750 1000 1190 1600 145 160 240 255 290 400 410 460 650 740 1100 1550 1700 2250 2300 2600 Ordering code (composition see below)
VR = 6.3 V DC 220 6.3 x 11 270 6.3 x 11 330 6.3 x 11 470 8 x 11.5 560 8 x 11.5 680 10 x 12.5 1000 10 x 12.5 1500 10 x 16 2200 10 x 20 3300 10 x 20 4700 12.5 x 25 VR = 10 V DC 100 5 x 11 150 6.3 x 11 220 6.3 x 11 270 6.3 x 11 330 8 x 11.5 470 8 x 11.5 560 8 x 11.5 680 10 x 12.5 1000 10 x 12.5 1500 10 x 20 2200 10 x 20 3300 12.5 x 25 4700 16 x 20 6800 16 x 25 8200 16 x 31.5 10000 18 x 31.5
B41821A2227M*** B41821A2277M*** B41821A2337M*** B41821A2477M*** B41821A2567M*** B41821A2687M*** B41821A2108M*** B41821A2158M*** B41821A2228M*** B41821A2338M*** B41821A2478M*** B41821A3107M*** B41821A3157M*** B41821A3227M*** B41821F3277M*** B41821A3337M*** B41821A3477M*** B41821F3567M*** B41821A3687M*** B41821A3108M*** B41821A3158M*** B41821A3228M*** B41821A3338M*** B41821A3478M*** B41821F3688M*** B41821F3828M*** B41821F3109M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 8 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 4.9 3.3 2.2 1.5 1.2 1.0 0.71 0.59 0.49 0.33 0.22 0.17 0.12 0.12 0.09 0.07 0.07 0.07 0.06 5.6 2.7 1.8 1.2 1.0 0.80 0.80 0.56
B41821 ESRmax 10 kHz 20 C 3.8 2.6 1.7 1.2 0.94 0.77 0.54 0.46 0.38 0.26 0.17 0.13 0.09 0.09 0.07 0.06 0.06 0.05 0.05 4.3 2.0 1.4 0.93 0.76 0.62 0.62 0.43 Zmax 100 kHz 20 C 3.50 2.40 1.60 1.10 0.88 0.72 0.50 0.42 0.35 0.24 0.16 0.12 0.09 0.09 0.07 0.05 0.05 0.05 0.04 4.0 1.9 1.3 0.86 0.70 0.57 0.57 0.40 IAC,R 120 Hz 85 C mA 100 180 185 260 270 370 440 550 600 790 950 1300 1700 1800 2100 2300 2400 2450 2750 115 190 195 330 350 440 440 550 Ordering code (composition see below)
VR = 16 V DC 68 5 x 11 100 5 x 11 150 6.3 x 11 220 6.3 x 11 270 8 x 11.5 330 8 x 11.5 470 8 x 11.5 560 10 x 12.5 680 10 x 12.5 1000 10 x 16 1500 10 x 20 2200 12.5 x 20 3300 12.5 x 25 3300 16 x 25 4700 16 x 25 6800 16 x 31.5 6800 18 x 31.5 8200 18 x 31.5 10000 18 x 35 VR = 25 V DC 47 5 x 11 100 6.3 x 11 150 6.3 x 11 220 8 x 11.5 270 8 x 11.5 330 8 x 11.5 330 10 x 12.5 470 10 x 12.5
B41821A4686M*** B41821A4107M*** B41821A4157M*** B41821F4227M*** B41821A4277M*** B41821A4337M*** B41821F4477M*** B41821A4567M*** B41821F4687M*** B41821A4108M*** B41821F4158M*** B41821K4228M*** B41821F4338M*** B41821A4338M*** B41821A4478M*** B41821F4688M*** B41821A4688M*** B41821F4828M*** B41821F4109M*** B41821A5476M*** B41821A5107M*** B41821F5157M*** B41821A5227M*** B41821F5277M*** B41821F5337M*** B41821A5337M*** B41821B5477M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 9 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 0.47 0.39 0.27 0.18 0.14 0.10 0.08 0.06 0.06 0.06 7.0 4.9 3.4 2.3 1.5 1.1 0.86 0.70 0.49 0.41 0.34 0.23 0.15 0.12 0.09 0.07 0.06
B41821 ESRmax 10 kHz 20 C 0.36 0.30 0.20 0.14 0.10 0.08 0.06 0.05 0.05 0.04 5.4 3.8 2.6 1.8 1.2 0.81 0.66 0.54 0.38 0.32 0.26 0.18 0.12 0.09 0.07 0.05 0.05 Zmax 100 kHz 20 C 0.34 0.28 0.19 0.13 0.10 0.07 0.06 0.05 0.04 0.04 5.0 3.5 2.4 1.7 1.1 0.75 0.61 0.50 0.35 0.30 0.24 0.17 0.11 0.09 0.06 0.05 0.04 IAC,R 120 Hz 85 C mA 580 630 960 1100 1550 1980 2450 2650 2750 2900 105 130 160 210 300 385 430 490 650 770 840 1150 1400 1800 2100 2550 2800 Ordering code (composition see below)
VR = 25 V DC 560 10 x 16 680 10 x 16 1000 10 x 20 1500 12.5 x 20 2200 12.5 x 25 3300 16 x 25 4700 16 x 31.5 6800 18 x 35 8200 18 x 40 10000 20 x 40 VR = 35 V DC 33 5 x 11 47 5 x 11 68 6.3 x 11 100 6.3 x 11 150 8 x 11.5 220 8 x 11.5 270 10 x 12.5 330 10 x 12.5 470 10 x 16 560 10 x 20 680 10 x 20 1000 12.5 x 20 1500 16 x 20 2200 16 x 25 3300 16 x 31.5 4700 18 x 35 6800 18 x 40
B41821A5567M*** B41821F5687M*** B41821A5108M*** B41821F5158M*** B41821F5228M*** B41821A5338M*** B41821A5478M*** B41821F5688M*** B41821F5828M*** B41821F5109M*** B41821A7336M*** B41821A7476M*** B41821A7686M*** B41821F7107M*** B41821A7157M*** B41821F7227M*** B41821A7277M*** B41821A7337M*** B41821A7477M*** B41821A7567M*** B41821A7687M*** B41821K7108M*** B41821F7158M*** B41821F7228M*** B41821F7338M*** B41821F7478M*** B41821K7688M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 10 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 20 9.0 6.0 4.2 2.9 2.0 1.3 0.90 0.74 0.60 0.42 0.36 0.29 0.20 0.13 0.11 0.11 0.08 0.06 29 20 9.0 9.0 6.0 4.2 4.2 2.9
B41821 ESRmax 10 kHz 20 C 15 7.0 4.6 3.3 2.3 1.5 1.0 0.70 0.57 0.46 0.33 0.27 0.23 0.15 0.10 0.08 0.08 0.06 0.05 23 15 7.0 7.0 4.6 3.3 3.3 2.3 Zmax 100 kHz 20 C 14 6.5 4.3 3.0 2.1 1.4 0.95 0.65 0.53 0.43 0.30 0.25 0.21 0.14 0.09 0.08 0.08 0.06 0.05 21 14 6.5 6.5 4.3 3.0 3.0 2.1 IAC,R 120 Hz 85 C mA 60 95 110 155 210 260 300 430 520 590 760 930 1000 1350 1800 1980 2200 2500 2800 50 65 100 110 140 170 180 220 Ordering code (composition see below)
VR = 50 V DC 10 5 x 11 22 5 x 11 33 6.3 x 11 47 6.3 x 11 68 6.3 x 11 100 8 x 11.5 150 8 x 11.5 220 10 x 12.5 270 10 x 16 330 10 x 16 470 10 x 20 560 12.5 x 20 680 12.5 x 20 1000 12.5 x 25 1500 16 x 25 2200 16 x 31.5 2200 18 x 35 3300 18 x 35 4700 20 x 40 VR = 63 V DC 6.8 5 x 11 10 5 x 11 22 5 x 11 22 6.3 x 11 33 6.3 x 11 47 6.3 x 11 47 8 x 11.5 68 8 x 11.5
B41821A6106M*** B41821A6226M*** B41821A6336M*** B41821A6476M*** B41821F6686M*** B41821A6107M*** B41821F6157M*** B41821A6227M*** B41821A6277M*** B41821A6337M*** B41821A6477M*** B41821F6567M*** B41821F6687M*** B41821F6108M*** B41821F6158M*** B41821F6228M*** B41821A6228M*** B41821F6338M*** B41821K6478M*** B41821A8685M*** B41821A8106M*** B41821F8226M*** B41821A8226M*** B41821A8336M*** B41821F8476M*** B41821A8476M*** B41821F8686M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 11 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 2.0 1.3 0.90 0.74 0.60 0.42 0.42 0.36 0.29 0.20 0.20 0.13 0.11 0.11 0.08 0.06 1658 754 502 353 244 166 111 75 50 35 17
B41821 ESRmax 10 kHz 20 C 1.5 1.0 0.70 0.57 0.46 0.33 0.33 0.27 0.23 0.15 0.15 0.10 0.08 0.08 0.06 0.05 1275 580 386 271 188 128 85 58 39 27 13 Zmax 100 kHz 20 C 1.4 0.95 0.65 0.53 0.43 0.30 0.30 0.25 0.21 0.14 0.14 0.09 0.08 0.08 0.06 0.05 1184 538 359 252 174 118 79 54 36 25 12 IAC,R 120 Hz 85 C mA 280 360 490 580 710 900 930 1000 1100 1300 1400 1800 2300 2400 2700 3200 2 5 7 10 13 21 24 30 40 45 75 Ordering code (composition see below)
VR = 63 V DC 100 8 x 11.5 150 10 x 12.5 220 10 x 16 270 10 x 20 330 10 x 20 470 12.5 x 20 470 12.5 x 25 560 12.5 x 25 680 16 x 20 1000 16 x 25 1000 16 x 31.5 1500 18 x 31.5 2200 18 x 35 2200 18 x 40 3300 20 x 40 4700 25 x 40 VR = 100 V DC 0.1 5 x 11 0.22 5 x 11 0.33 5 x 11 0.47 5 x 11 0.68 5 x 11 1 5 x 11 1.5 5 x 11 2.2 5 x 11 3.3 5 x 11 4.7 5 x 11 10 6.3 x 11
B41821F8107M*** B41821F8157M*** B41821A8227M*** B41821A8277M*** B41821A8337M*** B41821F8477M*** B41821A8477M*** B41821F8567M*** B41821F8687M*** B41821F8108M*** B41821A8108M*** B41821F8158M*** B41821K8228M*** B41821F8228M*** B41821A8338M*** B41821F8478M*** B41821A9104M*** B41821A9224M*** B41821A9334M*** B41821A9474M*** B41821A9684M*** B41821A9105M*** B41821A9155M*** B41821A9225M*** B41821A9335M*** B41821A9475M*** B41821A9106M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 12 of 36
B41821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 7.5 5.0 3.5 2.4 1.7 1.1 0.75 0.61 0.50 0.35 0.30 0.24 0.17
B41821 ESRmax 10 kHz 20 C 5.8 3.9 2.7 1.9 1.3 0.85 0.58 0.47 0.39 0.27 0.23 0.19 0.13 Zmax 100 kHz 20 C 5.4 3.6 2.5 1.7 1.2 0.79 0.54 0.44 0.36 0.25 0.21 0.17 0.12 IAC,R 120 Hz 85 C mA 140 190 230 280 350 550 620 770 800 1000 1050 1100 1400 Ordering code (composition see below)
VR = 100 V DC 22 8 x 11.5 33 10 x 12.5 47 10 x 12.5 68 10 x 16 100 10 x 20 150 12.5 x 25 220 12.5 x 25 270 16 x 25 330 16 x 25 470 16 x 31.5 560 16 x 31.5 680 18 x 40 1000 20 x 40
B41821A9226M*** B41821A9336M*** B41821B9476M*** B41821A9686M*** B41821A9107M*** B41821A9157M*** B41821A9227M*** B41821A9277M*** B41821A9337M*** B41821A9477M*** B41821A9567M*** B41821F9687M*** B41821A9108M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 13 of 36
B43821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 395 273 186 124 85 56 40 27 18 13 8.4 7.5 5.6 4.5 4.0 2.7 2.7 2.3 1.8 1.2 1.0 0.84 0.75 0.67 0.70 0.56 0.40 0.33
B43821 Zmax 100 kHz 20 C 158 109 74 50 34 22 16 11 7.4 5.0 3.4 3.0 2.2 1.8 1.6 1.1 1.1 0.92 0.74 0.49 0.38 0.34 0.30 0.27 0.28 0.22 0.16 0.13 IAC,R 120 Hz 85 C mA 15 18 22 30 33 40 50 65 80 130 155 180 205 270 290 350 365 430 475 600 760 800 900 950 995 1000 1300 1500 Ordering code (composition see below)
ESRmax 10 kHz 20 C 296 205 139 93 63 42 30 21 14 9.5 6.3 5.6 4.2 3.4 3.0 2.1 2.1 1.7 1.4 0.92 0.71 0.63 0.56 0.50 0.53 0.42 0.30 0.25
VR = 160 V DC 0.47 6.3 x 11 0.68 6.3 x 11 1 6.3 x 11 1.5 6.3 x 11 2.2 6.3 x 11 3.3 6.3 x 11 4.7 6.3 x 11 6.8 8 x 11.5 10 8 x 11.5 22 10 x 12.5 22 10 x 16 33 10 x 16 33 10 x 20 47 12.5 x 20 47 12.5 x 25 68 12.5 x 25 68 16 x 20 100 12.5 x 25 100 16 x 25 150 16 x 31.5 220 16 x 31.5 220 18 x 31.5 270 18 x 35 270 18 x 40 330 18 x 35 330 20 x 30 470 22 x 35 560 22 x 40
B43821A1474M*** B43821A1684M*** B43821A1105M*** B43821A1155M*** B43821A1225M*** B43821A1335M*** B43821F1475M*** B43821A1685M*** B43821F1106M*** B43821F1226M*** B43821A1226M*** B43821F1336M*** B43821A1336M*** B43821F1476M*** B43821A1476M*** B43821F1686M*** B43821A1686M*** B43821F1107M*** B43821A1107M*** B43821A1157M*** B43821F1227M*** B43821A1227M*** B43821F1277M*** B43821A1277M*** B43821F1337M*** B43821A1337M*** B43821A1477M*** B43821A1567M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 14 of 36
B43821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 395 273 186 124 85 56 40 27 18 8.4 8.4 5.6 4.5 4.0 3.3 2.7 1.8 1.2 0.84 0.67 0.56
B43821 Zmax 100 kHz 20 C 158 109 74 50 34 22 16 11 7.4 3.4 3.4 2.2 1.8 1.6 1.3 1.1 0.74 0.49 0.34 0.27 0.22 IAC,R 120 Hz 85 C mA 15 18 22 30 33 40 55 78 95 155 170 205 270 290 350 365 475 640 770 910 1060 Ordering code (composition see below)
ESRmax 10 kHz 20 C 296 205 139 93 63 42 30 21 14 6.3 6.3 4.2 3.4 3.0 2.5 2.1 1.4 0.92 0.63 0.50 0.42
VR = 200 V DC 0.47 6.3 x 11 0.68 6.3 x 11 1 6.3 x 11 1.5 6.3 x 11 2.2 6.3 x 11 3.3 6.3 x 11 4.7 8 x 11.5 6.8 10 x 12.5 10 10 x 12.5 22 10 x 16 22 10 x 20 33 10 x 20 47 12.5 x 20 47 12.5 x 25 68 12.5 x 25 68 16 x 20 100 16 x 25 150 18 x 31.5 220 18 x 35 270 20 x 35 330 22 x 35
B43821A2474M*** B43821A2684M*** B43821A2105M*** B43821A2155M*** B43821A2225M*** B43821A2335M*** B43821A2475M*** B43821A2685M*** B43821B2106M*** B43821B2226M*** B43821A2226M*** B43821B2336M*** B43821B2476M*** B43821A2476M*** B43821B2686M*** B43821A2686M*** B43821A2107M*** B43821A2157M*** B43821A2227M*** B43821A2277M*** B43821A2337M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 15 of 36
B43821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 395 273 186 124 85 56 40 27 23 18 8.4 5.6 4.3 4.0 2.7 1.8 1.2 0.84 0.67 0.56
B43821 Zmax 100 kHz 20 C 158 109 74 50 34 22 16 11 9.0 7.4 3.4 2.2 1.7 1.6 1.1 0.74 0.49 0.34 0.27 0.22 IAC,R 120 Hz 85 C mA 15 18 22 30 33 50 55 78 95 105 170 230 290 300 380 520 615 680 810 940 Ordering code (composition see below)
ESRmax 10 kHz 20 C 296 205 139 93 63 42 30 21 17 14 6.3 4.2 3.2 3.0 2.1 1.4 0.92 0.63 0.50 0.42
VR = 250 V DC 0.47 6.3 x 11 0.68 6.3 x 11 1 6.3 x 11 1.5 6.3 x 11 2.2 6.3 x 11 3.3 8 x 11.5 4.7 8 x 11.5 6.8 10 x 12.5 10 10 x 12.5 10 10 x 16 22 10 x 20 33 12.5 x 20 47 12.5 x 25 47 16 x 20 68 16 x 25 100 16 x 31.5 150 18 x 40 220 18 x 40 270 22 x 35 330 22 x 40
B43821F2474M*** B43821F2684M*** B43821F2105M*** B43821F2155M*** B43821F2225M*** B43821F2335M*** B43821K2475M*** B43821F2685M*** B43821K2106M*** B43821F2106M*** B43821F2226M*** B43821K2336M*** B43821K2476M*** B43821F2476M*** B43821F2686M*** B43821K2107M*** B43821F2157M*** B43821F2227M*** B43821F2277M*** B43821F2337M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 16 of 36
B43821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 395 273 186 124 85 56 40 27 18 8.4 5.6 4.0 2.7 2.3 1.8 1.2 85 56 40 27 18 8.4 5.6 4.0 2.8 1.9 1.8 1.2
B43821 Zmax 100 kHz 20 C 158 109 74 50 34 22 16 11 7.4 3.4 2.2 1.6 1.1 0.90 0.74 0.49 34 22 16 11 7.4 3.4 2.2 1.6 1.1 0.74 0.74 0.49 IAC,R 120 Hz 85 C mA 15 18 22 32 38 55 65 85 115 200 240 300 420 520 530 700 45 55 70 85 115 200 240 280 420 450 460 600 Ordering code (composition see below)
ESRmax 10 kHz 20 C 296 205 139 93 63 42 30 21 14 6.3 4.2 3.0 2.1 1.7 1.4 0.92 63 42 30 21 14 6.3 4.2 3.0 2.1 1.4 1.4 0.92
VR = 350 V DC 0.47 6.3 x 11 0.68 6.3 x 11 1 6.3 x 11 1.5 8 x 11.5 2.2 8 x 11.5 3.3 10 x 12.5 4.7 10 x 12.5 6.8 10 x 16 10 10 x 20 22 12.5 x 25 33 12.5 x 25 47 16 x 25 68 18 x 31.5 100 18 x 35 100 20 x 30 150 20 x 40 VR = 400 V DC 2.2 10 x 12.5 3.3 10 x 12.5 4.7 10 x 16 6.8 10 x 16 10 10 x 20 22 12.5 x 25 33 16 x 20 47 16 x 25 68 18 x 31.5 100 18 x 40 100 20 x 35 150 20 x 40
B43821A4474M*** B43821A4684M*** B43821A4105M*** B43821A4155M*** B43821A4225M*** B43821A4335M*** B43821A4475M*** B43821A4685M*** B43821A4106M*** B43821A4226M*** B43821F4336M*** B43821F4476M*** B43821A4686M*** B43821F4107M*** B43821A4107M*** B43821A4157M*** B43821A9225M*** B43821A9335M*** B43821A9475M*** B43821A9685M*** B43821A9106M*** B43821F9226M*** B43821F9336M*** B43821F9476M*** B43821A9686M*** B43821F9107M*** B43821A9107M*** B43821A9157M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 17 of 36
B43821 Standard series 85 C
Technical data and ordering codes CR 120 Hz 20 C F Case dimensions dxl mm ESRmax 120 Hz 20 C 85 56 40 27 26 14 8.4 7.6 5.6 4.8 4.0 2.7 1.8
B43821 Zmax 100 kHz 20 C 34 22 16 11 10 5.4 3.4 3.0 2.2 1.9 1.6 1.1 0.74 IAC,R 120 Hz 85 C mA 35 45 50 75 80 140 165 180 190 220 265 275 295 Ordering code (composition see below)
ESRmax 10 kHz 20 C 63 42 30 21 19 10 6.3 5.7 4.2 3.6 3.0 2.1 1.4
VR = 450 V DC 2.2 10 x 12.5 3.3 10 x 16 4.7 10 x 16 6.8 10 x 20 10 10 x 20 22 12.5 x 25 22 16 x 25 33 16 x 25 33 16 x 31.5 47 16 x 31.5 47 18 x 31.5 68 18 x 35 100 20 x 40
B43821A5225M*** B43821A5335M*** B43821F5475M*** B43821A5685M*** B43821F5106M*** B43821F5226M*** B43821A5226M*** B43821F5336M*** B43821A5336M*** B43821F5476M*** B43821A5476M*** B43821A5686M*** B43821A5107M***
Composition of ordering code *** = Version 000 = for standard leads, bulk 001 = for kinked leads, bulk (for 10 mm) 002 = for cut leads, bulk (for 10 mm) 003 = for crimped leads, blister (for 16 mm) 004 = for J leads, blister (from d x l = 10 x 12.5 mm to 18 x 35 mm) 008 = for taped leads, Ammo pack, lead spacing F = 5.0 mm (from d x l = 6.3 x 11 mm to 12.5 x 25 mm) 009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d x l = 16 x 20 mm to 18 x 31.5 mm) 012 = for bent 90 leads, blister (for 16 and 18 mm)
Please read Cautions and warnings and Important notes at the end of this document.
Page 18 of 36
B41821, B43821 Standard series 85 C
Useful life depending on ambient temperature TA under ripple current operating conditions1) VR = 6.3 ... 100 V DC
VR = 160 ... 450 V DC
1)
Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life graphs.
Please read Cautions and warnings and Important notes at the end of this document.
Page 19 of 36
B41821, B43821 Standard series 85 C
Frequency factor of permissible ripple current IAC versus frequency f VR 100 V DC
Frequency factor of permissible ripple current IAC versus frequency f VR 160 V DC
Please read Cautions and warnings and Important notes at the end of this document.
Page 20 of 36
B41821, B43821 Standard series 85 C
Taping, packing and lead configurations Taping Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows: Lead spacing F = 2.5 mm ( d = 5 ... 6.3 mm) Lead spacing F = 3.5 mm ( d = 8 mm) Lead spacing F = 5.0 mm ( d = 5 ... 12.5 mm) Lead spacing F = 7.5 mm ( d = 16 ... 18 mm). Lead spacing 2.5 mm ( d = 5 ... 6.3 mm) Last 3 digits of ordering code: 007
Dimensions in mm d 5 F H W W0 W1 W2 H0 P P0 P1 I1 t h D0
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0 6.3 Toler- +0.8 0.75 0.5 min. 0.5 max. 0.5 1.0 0.2 0.5 max. 0.2 max. 0.2 ance 02
Please read Cautions and warnings and Important notes at the end of this document.
Page 21 of 36
B41821, B43821 Standard series 85 C
Lead spacing 3.5 mm ( d = 8 mm) Last 3 digits of ordering code: 006
Dimensions in mm d F 8 3.5 Toler- +0.8 ance 02 H 18.5 1.0 W 18.0 0.5 W0 12.5 min. W1 9.0 0.5 W2 1.5 P 12.7 P0 12.7 0.2 P1 4.6 0.5 I1 1.0 t 0.7 h 1.0 D0 4.0
max. 1.0
max. 0.2
max. 0.2
Please read Cautions and warnings and Important notes at the end of this document.
Page 22 of 36
B41821, B43821 Standard series 85 C
Lead spacing 5.0 mm ( d = 5 ... 8 mm) Last 3 digits of ordering code: 008
Lead spacing 5.0 mm ( d = 10 ... 12.5 mm) Last 3 digits of ordering code: 008
Dimensions in mm d 5 6.3 8 10 5.0 12.5 Toler- +0.8 ance 02 F 5.0 H 18.5 20.0 19.0 19.0 0.75 0.5 min. 0.5 max. 0.5 18.0 12.5 9.0 1.5 W W0 W1 9.0 W2 1.5 H0 16.0 16.0 P 12.7 12.7 12.7 15.0 1.0 P0 12.7 12.7 12.7 15.0 0.2 P1 3.85 3.85 3.85 5.0 0.5 max. 0.2 max. 0.2 1.0 0.7 1.0 4.0 I1 1.0 t 0.7 h 1.0 D0 4.0
18.0 5.5
Please read Cautions and warnings and Important notes at the end of this document.
Page 23 of 36
B41821, B43821 Standard series 85 C
Lead spacing 7.5 mm ( d = 16 ...18 mm) Last 3 digits of ordering code: 009
Dimensions in mm d 16 F H W W0 12.5 min. W1 9.0 0.5 W2 1.5 P 30.0 P0 15.0 0.2 P1 3.75 0.5 I1 1.0 t 0.7 P 0 h 0 D0 4.0
7.5 18.5 18.0 18 *) Toler0.5 0.8 0.5 ance +0.75
max. 1.0
max. 0.2 1.0 1.0 0.2
*) Available only for case dimensions 18 x 20, 18 x 25 and 18 x 31.5 mm
Please read Cautions and warnings and Important notes at the end of this document.
Page 24 of 36
B41821, B43821 Standard series 85 C
Packing units and box dimensions Ammo pack Case size dxl mm 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 12.5 x 25 12.5 x 30 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 18 x 31.5 Dimensions (mm) Amax 345 345 345 345 345 345 345 345 345 345 315 315 315 315 315 315 Bmax 55 55 55 55 60 60 65 65 65 65 65 65 65 65 65 65 Cmax 240 290 240 280 200 200 280 280 280 275 275 275 275 275 275 275 Packing units pcs. 2000 2000 1000 750 500 500 500 500 500 500 300 300 300 250 250 250
Please read Cautions and warnings and Important notes at the end of this document.
Page 25 of 36
B41821, B43821 Standard series 85 C
Kinked or cut leads Single-ended capacitors are available with kinked or cut leads. Other lead configurations also available upon request. Kinked leads Last 3 digits of ordering code: 001 With stand-off rubber seal Case size d x l (mm) 10 x 20 12.5 x 20 12.5 x 25 12.5 x 30 12.5 x 35 12.5 x 40 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 With flat rubber seal 18 x 31.5 18 x 35 18 x 40 20 x 20 20 x 25 20 x 40 22 x 30 22 x 35 22 x 40 Dimensions (mm) a 0.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.0 10.0
Please read Cautions and warnings and Important notes at the end of this document.
Page 26 of 36
B41821, B43821 Standard series 85 C
Cut leads Last 3 digits of ordering code: 002 With stand-off rubber seal Case size d x l (mm) 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 With flat rubber seal 12.5 x 30 12.5 x 35 12.5 x 40 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 18 x 31.5 18 x 35 18 x 40 20 x 20 20 x 25 20 x 40 Dimensions (mm) a 0.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0
Please read Cautions and warnings and Important notes at the end of this document.
Page 27 of 36
B41821, B43821 Standard series 85 C
PAPR leads (Protection Against Polarity Reversal) These lead configurations ensure correct placement of the capacitor on the PCB with regard to polarity. PAPR leads are available for diameters from 10 mm up to 20 mm. There are three configurations available: Crimped leads, J leads, bent 90 leads Crimped leads Last 3 digits of ordering code: 003 With stand-off rubber seal With flat rubber seal
Suggestion for PCB hole diameter
Case size d x l (mm) 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 18 x 31.5 18 x 35 18 x 40 20 x 20 20 x 25 20 x 40
Dimensions (mm) B 0.2 C 0.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
D 0.1 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.6 1.6 1.6
E 0.1 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
a 0.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0
b 0.8 0.05 0.8 0.05 0.8 0.05 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 1.0 0.1 1.0 0.1 1.0 0.1
Please read Cautions and warnings and Important notes at the end of this document.
Page 28 of 36
B41821, B43821 Standard series 85 C
J leads Last 3 digits of ordering code: 004
Suggestion for PCB hole diameter
Case size d x l (mm) 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 18 x 31.5 18 x 35
Dimensions (mm) C 0.5 E 0.5 3.2 3.2 3.2 3.2 3.2 3.5 3.5 3.5 3.5 3.5 3.5 3.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
J 0.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6
a 0.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5
b 0.6 0.05 0.6 0.05 0.6 0.05 0.6 0.05 0.6 0.05 0.8 0.05 0.8 0.05 0.8 0.05 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1
Please read Cautions and warnings and Important notes at the end of this document.
Page 29 of 36
B41821, B43821 Standard series 85 C
Bent 90 leads for horizontal mounting pinning Last 3 digits of ordering code: 012
Case size d x l (mm) 16 x 20 16 x 25 16 x 31.5 18 x 20 18 x 25 18 x 31.5 18 x 35 18 x 40
Dimensions (mm) C 0.5 E 0.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
F 0.5 12.0 12.0 12.0 13.0 13.0 13.0 13.0 13.0
a 0.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
b 0.8 0.05 0.8 0.05 0.8 0.05 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1
Bent leads for diameter 12.5 mm available upon request.
Please read Cautions and warnings and Important notes at the end of this document.
Page 30 of 36
B41821, B43821 Standard series 85 C
Overview of packing units and code numbers for case sizes 5 x 11 ... 16 x 31.5 PAPR Case size dxl mm 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 20 12.5 x 25 12.5 x 30 12.5 x 35 12.5 x 40 16 x 20 16 x 25 16 x 31.5 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 2000 2500 1000 1000 100 500 350 250 200 175 175 250 250 200 000 Taped, Ammo pack pcs. 2000 2000 1000 750 500 500 500 500 500 300 300 300 Code 006 007 008 009 F (mm) d (mm) 3.5 2.5 5 7.5 8 5...6.3 5...12.5 16...18 500 350 500 175 175 175 200 200 250 001 1000 1000 500 350 500 175 175 175 200 200 250 002 200 200 344 003 675 675 500 300 225 180 150 150 200 200 344 004
1) 1) 1) 1) 1)
Kinked leads, bulk pcs.
Cut Crimped J leads leads, leads bulk pcs. pcs. pcs.
Bent 90 leads, blister pcs.
120 120 120 012
1)
Available upon request
Please read Cautions and warnings and Important notes at the end of this document.
Page 31 of 36
B41821, B43821 Standard series 85 C
Overview of packing units and code numbers for case sizes 18 x 20 ... 25 x 40 PAPR Case size dxl mm 18 x 20 18 x 25 18 x 31.5 18 x 35 18 x 40 20 x 20 20 x 25 20 x 30 20 x 35 20 x 40 22 x 30 22 x 35 22 x 40 25 x 40 The last three digits of the complete ordering code state the lead configuration Standard, bulk pcs. 175 150 100 100 125 125 125 100 100 100 80 80 80 40 000 Code 007 008 009 F (mm) d (mm) 2.5 5 7.5 4...6.3 6.3...12.5 16...18 Taped, Ammo pack pcs. 250 250 250 Kinked leads, bulk pcs. 175 150 100 100 100 125 125 100 100 100 100 100 100 100 001 002 003 004 012 Cut Crimped J leads leads, leads bulk pcs. pcs. pcs. 175 150 100 100 100 125 125 100 100 100 100 100 100 200 200 150 150 120 200 200 120 120 120 200 200 150 150 Bent 90 leads, blister pcs. 120 120 120 150 72
Please read Cautions and warnings and Important notes at the end of this document.
Page 32 of 36
B41821, B43821 Standard series 85 C
Cautions and warnings Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. They do not contain any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide (DMAC). Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited. As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. Nevertheless, the following rules should be observed when handling Al electrolytic capacitors: Any escaping electrolyte should not come into contact with eyes or skin. If electrolyte does come into contact with the skin, wash the affected parts immediately with running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical treatment. Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be well ventilated. Clothing that has been contaminated by electrolyte must be changed and rinsed in water.
Please read Cautions and warnings and Important notes at the end of this document.
Page 33 of 36
B41821, B43821 Standard series 85 C
Product safety The table below summarize the safety instructions that must be observed without fail. A detailed description can be found in the relevant sections of chapter "General technical information". Topic Safety information Reference Chapter "General technical information" 1 "Basic construction of aluminum electrolytic capacitors" 3.1.6 "Reverse voltage" 7.2 "Maximum permissible operating temperature" 10 "Maintenance"
Polarity
Make sure that polar capacitors are connected with the right polarity.
Reverse voltage Upper category temperature Maintenance
Voltages polarity classes should be prevented by connecting a diode. Do not exceed the upper category temperatur.
Mounting position of screw terminal capacitors Mounting of single-ended capacitors
Make periodic inspections of the capacitors. Before the inspection, make sure that the power supply is turned off and carefully discharge the electricity of the capacitors. Do not apply any mechanical stress to the capacitor terminals. Do not mount the capacitor with the terminals (safety vent) upside down.
Robustness of terminals
Soldering
11.1. "Mounting positions of capacitors with screw terminals" The internal structure of single-ended capacitors 11.4 might be damaged if excessive force is applied to "Mounting the lead wires. considerations for Avoid any compressive, tensile or flexural stress. single-ended capacitors" Do not move the capacitor after soldering to PC board. Do not pick up the PC board by the soldered capacitor. Do not insert the capacitor on the PC board with a hole space different to the lead space specified. The following maximum tightening torques must 11.3 not be exceeded when connecting screw "Mounting torques" terminals: M5: 2 Nm M6: 2.5 Nm Do not exceed the specified time or temperature 11.5 limits during soldering. "Soldering"
Page 34 of 36
Please read Cautions and warnings and Important notes at the end of this document.
B41821, B43821 Standard series 85 C
Topic
Safety information
Soldering, cleaning agents Passive flammability Active flammability
Reference Chapter "General technical information" Do not allow halogenated hydrocarbons to come 11.6 into contact with aluminum electrolytic capacitors. "Cleaning agents" Avoid external energy, such as fire or electricity. 8.1 "Passive flammability" Avoid overload of the capacitors. 8.2 "Active flammability" Reference Chapter "Capacitors with screw terminals" "Screw terminals accessories"
Breakdown strength Do not damage the insulating sleeve, especially of insulating when ring clips are used for mounting. sleeves
Please read Cautions and warnings and Important notes at the end of this document.
Page 35 of 36
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 36 of 36

▲Up To Search▲

Price & Availability of B41821K4228M003

	To Download B41821K4228M003 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .